TC 1200

STANDARD SPEC SHEET

TC 1200 - TEXTURE/CURE MACHINE

---

Diesel Engine* -                    

• 35 hp (25.7 kW) Tier IV
• enclosed engine compartment
• engine sound proofing

Hydraulic Oil Reservoir - 44 gallon (167 liter)                

Fuel Reservoir - 16.6 gallon (63 liter)                    

Hydraulic Pump System

• double stage hydraulic pump
• flow divider isolates right travel system from left travel system

Main Frame              

• superior structural strength
• 30-inch (76 cm) wide expanded metal walkway
• 20- inch (61 cm) deep tubular frame
• bolt together sectional design
• 12 ft. (3.65 m) main frame (paving width 12 ft.)
• 30-inch (76 cm) wide structural frame
• frame extensions available: 2 ft. (61 cm), 4 ft. (122 cm), 10 ft. (304 cm), custom sections
• 12 ft. - 45 ft. (3.65 m - 13.7 m) widths standard
• frame legs adjustable for 0 to 24-inch (0 - 61 cm) slabs

Rubber Track Drive             

• proportional controls for infinite variability of speed
• direct hydraulic drive, no chains or sprockets
• 1-inch (230 mm) wide continuous rubber track
• 115 ft. (35 m) per minute maximum travel speed

Lower Work Platform                     

• lower level to assist with hand working of slab
• treated wood for durability and comfort
• located at bottom of bridge frame for easy access to concrete slab

Operator’s Platform                       

• spray and travel system pressure gauges
• hydraulic controls: travel, cure sprayer, drag lift, auto steer
• operator’s seat for safety and comfort
• engine controls on console
• safety railing for access to walk platform

*Engine make determined by customer need and availability  

 

Optional Equipment

(not included in base machine)

Hydraulic Burlap (or astro-turf) Drag Lift

• controlled at operator’s platform             
• single lever control

Poly Roll Attachment

• hydraulically controlled
• sectional design for various coverage widths
• poly roll material not included

Cure Spray System                                                                                                

• continuous return agitation, variable speed
• hydraulic control from operator’s platform
• standard 55 gallon (208 liter) drum carrier
• wind screen to reduce drift
• adjustable outside nozzle booms for slab edge coverage
• double filtration of cure material to reduce nozzle plugs
• non-drip, triple tip nozzles

Longitudinal Tining System                                                                                              

• hydraulically controlled from operator’s platform
• automatic steering suggested
• tines not included
• includes two sensors

Transverse Tining System                                                                                    

• hydraulically controlled from operator’s platform
• automatic steering suggested
• tines not included
• must have 4 grade sensors

Grade Sensors                                                                                                        

• 4 grade sensors are needed for Transverse Tining System

Automatic Forward Steering System                                                                             

• 1 hydraulic stringline sensor
• steer from right or left-hand side of machine
• automatic and manual steering, controlled from operator's platform

Automatic Rear Steering System                                                                                   

• 1 hydraulic sensor

Cure Tote Rack                                                                                                                    

• framework for allowing the use of 250 gallon (950 liter) plastic cure container
• includes additional cure section and return hoses

Water System for Burlap Drag                                                                                         

• electric water pump with 25 gallon (95 liter)
• all required hoses and wiring
• spray pipe with fogging nozzle tips
• sediment strainer

Form Riding Wheels (in lieu of tracks)                                                                       

Transport Axle

• hydraulic controls
• removable transport hitch

Frame Inserts without Spray                    

• 24-inch (61 cm)
• 48-inch (122 cm)
• 120-inch (3.04 m)

Frame Inserts with Spray Bar and Screen                      

• 24-inch (61 cm)
• 48-inch (122 cm)
• 120-inch (3.04 m)
• 1m
• 2m

Critical Spare Parts Package                                                                               

2-year Filter Package         

Material and specifications subject to change without notification