SFP 10-17
Slip Form Paver

Standard Spec Sheet

SFP 10-17 - 2 Track Slip Form Paver

Turbocharged Diesel Engine

· 185 hp (136 kW) Tier III
· enclosed engine compartment
· engine sound proofing

Hydraulic Oil Reservoir - 205 gallon (775 liter)

Fuel Reservoir - 95 gallon (359 liter)

1 Hydraulic System Heat Exchanger with electric fan

8 Hydraulic Vibrators

·         vertical adjustment controlled from operator platform
·         individual or en-masse vibrator speed controls
·         automatic shut-off with machine travel
·         maximum flow 4 gallon (15.14 liter) per minute
·         normal operating pressure 800 - 1300 psi

8 Hydraulic Vibrator Circuits

·   with individual variable controls
·   pressure compensated

Hydraulic Pump System

·         (2) quad stage hydraulic pumps
·         (1) pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

·         length : 11 ft 11 inch (3.65 m)
·         width : 12 inch (30 cm)
·         6 inch (15 cm) pitch - triple grouser shoes
·         49:1 gear reduction
·         sealed, lifetime lubricated rollers

10 ft to 17 ft (3 m to 5.5 m) Paving Width by 6 inch (15 cm) increments

·         10 ft (3 m) main frame (minimum width)
·         additional paving width to 21 ft (6.4 m) is optional

Paving Pans

·         bolt-together sections to allow for paving
10 ft - 17 ft (3.05 m - 5.18 m) by 6 inch (15 cm) increments
3/8 inch thick x 18 inch high x 42 inch long (9 mm thick x 45 cm high x 106.68 cm long)
·         curb mold inserts for right and/or left side
·         8 inch (20 cm) long trailing profile pans for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

·         adjustable tamping depth
·         variable speed
·         double bar system

Hydraulically Adjustable Side Forms

·         6 way hydraulic adjustment
·         split 30 inch (76 cm) high side forms – folding inward for transport
·         side forms attach to the main frame of the machine, not tracks
·         18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
·        adjustable edge slump control
·         hydraulically controlled from ground and operators platform

Spreader Auger System

·         16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
·         planetary drives
·         augers are adjustable for height
·         augers drives are shielded from wet concrete
·          quick disconnect for width changes

Hydraulic Strike-Off

·         hydraulically controlled strike-off plates
·         individual controls for variable crown paving

Grade Control System

·         4 hydraulic stringline sensors
·         automatic and manual control from operator’s platform
·         system works with two string lines, or “lock to grade”

Steering System

·         1 hydraulic stringline sensor
·         steer from right or left hand side of machine
·         automatic and manual steering, controlled from operator’s platform

Power Wash System

·         (1) 110 gallon (416 cm) water tanks
·         2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
·         25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

·         single switch operation
·         electronic over hydraulic
·         controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher

Operator’s Platform

·         hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
·         hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
·         high visibility “wrap around” console
·         engine controls and monitoring devices mounted on console
·         safety railing
·         engineered for easy monitoring of all machine functions
·         canopy

Optional Equipment

not included in base machine

  • Poly Pads
  • Additional Complete Frame Extension Assemblies
  • Additional Hydraulic Vibrators
  • Curb Molds Built to Customer Specification
  • Male Side Form Key
  • Hydraulic Center Bar Inserters with Electronic Indicator
  • Hydraulic Side Bar Inserter with Electronic Indicator
  • Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
  • Hydraulic Curb Shut-Off for Curb Molds
  • Manual Curb Shut-Off for Curb Molds
  • Belt Conveyor for Unloading Transit Mixer Off-Grade
  • Sensor for Reverse Steering and Travel
  • Water Fogging Bar (for Watering Burlap)
  • Additional 8 Port Vibrator Manifold (when purchased with new machine)
  • 4 Point Outrigger Lift -for lifting the Paver for Truck loading
  • Hydraulic Oscillating Auto Float
  • Hydraulic Edge Slump Control (in lieu of manual)
  • Metal Keyway Former and Punch Assembly
  • Optional Track Lengths and Width
  • Power Crown
  • Manual Crown
  • Material and Specifications subject to change without notification

Call Today +1.319.824.3011