SFP 12-27
Slip Form Paver

Standard Spec Sheet

SFP12-27 - 2 Track Slip Form Paver

Turbocharged Diesel Engine -

240 hp (177 kW)
·         enclosed engine compartment
·         engine sound proofing

Hydraulic Oil Reservoir 211 gallon (798 liter)

Fuel Reservoir 116 gallon (440 liter)

2 Hydraulic System Heat Exchangers with electric fan

16 Hydraulic Vibrators

·         vertical adjustment controlled from operator platform
·         individual or en-masse vibrator speed controls
·         automatic shut-off with machine travel
·         maximum flow 4 gallon (15.14 liter) per minute
·         normal operating pressure 800 - 1300 psi

16 Hydraulic Vibrator Circuits

·   with individual variable controls
·   pressure compensated

Hydraulic Pump System

·         (2) triple stage hydraulic pumps
·         (1) double stage hydraulic pump
·         one pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

·         length: 11 ft 11 inches (3.65 m)
·         width: 12 inches (30 cm)
·         6 inch (15 cm) pitch - triple grouser shoes
·         101:1 gear reduction
·         sealed, lifetime lubricated rollers

12 ft - 27 ft (3.65 m - 8.2 m) Paving Width by 6 inch (15 cm) increments

·         12 ft (3.65 m) main frame (minimum width)
·         additional paving width to 35 ft (10.67 m) is optional

Paving Pans

·         bolt-together sections to allow for paving
12 ft - 27 ft (3.65 m - 8.2 m) by 6 inch (15 cm) increments
3/8 inch thick x 18 inch high x 52 inch long
(9 mm thick x 45 cm high x 132 cm long)
·         power crown “on-the-go” for uninterrupted paving
through transitions and intersections
·         tampers and vibrator rack follow vertical movement of pans
·         hydraulic power crown controlled from operator console
·         crown gauge indicator
·         curb mold inserts for right and/or left side
·         8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

·         adjustable tamping depth
·         variable speed
·         double bar system

Hydraulically Adjustable Side Forms

·         6 way hydraulic adjustment
·         split 30 inch (76 cm) high side forms – folding inward for transport
·         side forms attach to the main frame of the machine, not tracks
·         18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
·         adjustable edge slump control
·         hydraulically controlled from ground and operators platform

Spreader Auger System

·         16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
·         planetary drives
·         augers are adjustable for height
·         augers drives are shielded from wet concrete
·          quick disconnect for width changes

Hydraulic Strike-Off

·         hydraulically controlled strike-off plates
·         individual controls for variable crown paving

Grade Control System

·         4 hydraulic stringline sensors
·         automatic and manual control from operator’s platform
·         system works with two string lines, or “lock to grade”

Steering System

·         1 hydraulic stringline sensor
·         steer from right or left hand side of machine
·         automatic and manual steering, controlled from operator's platform

Power Wash System

·         (2) 110 gallon (416 liter) water tanks
·         2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
·         25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

·         single switch operation
·         electronic over hydraulic
·         controls all critical functions of machine:
grade, travel, tamper, vibration, belt finisher

Operator’s Platform

·         hydraulic system pressure gauges:
grade, travel, vibrator, tamper, auger
·         hydraulic controls: travel, vibrator, tamper,
pressure wash, strike-off, auger, grade
·         high visibility “wrap around” console
·         engine controls and monitoring devices mounted on console
·         safety railing
·         engineered for easy monitoring of all machine functions
·         canopy

Optional Equipment

not included in base machine

  • Poly Pads
  • Additional Complete Frame Extension Assemblies
  • Additional Hydraulic Vibrators
  • Curb Molds Built to Customer Specification
  • Male Side Form Key
  • Hydraulic Center Bar Inserters with Electronic Indicator
  • Hydraulic Side Bar Inserter with Electronic Indicator
  • Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
  • Hydraulic Curb Shut-Off for Curb Molds
  • Manual Curb Shut-Off for Curb Molds
  • Belt Conveyor for Unloading Transit Mixer Off-Grade
  • Sensor for Reverse Steering and Travel
  • Water Fogging Bar (for Watering Burlap)
  • Additional 8 Port Vibrator Manifold
  • 4 Point Outrigger Lift -for lifting the Paver for Truck loading
  • Hydraulic Oscillating Auto Float
  • Hydraulic Edge Slump Control (in lieu of manual)
  • Metal Keyway Former and Punch Assembly
  • Other Engines Available at Customer Request
  • Optional Track Lengths and Width
  • Material and Specifications subject to change without notification

Call Today +1.319.824.3011