SFP 12-28H
Slip Form Paver - High Profile

Standard Spec Sheet

SFP 12-28H - 2 Track Slip Form Paver

Turbocharged Diesel Engine -

·  240 hp (177 kW)
·  enclosed engine compartment
·  engine sound proofing

Hydraulic Oil Reservoir - 231 gallon (874 liter)

Fuel Reservoir - 116 gallon (439 liter)

2 Hydraulic System Heat Exchangers with electric fan

16 Hydraulic Vibrators

·         vertical adjustment controlled from operator platform
·         individual or en-masse vibrator speed controls
·         automatic shut-off with machine travel
·         maximum flow 4 gallon (15.14 liter) per minute
·         normal operating pressure 800 - 1300 psi

16 Hydraulic Vibrator Circuits

·   with individual variable controls
·   pressure compensated

Hydraulic Pump System

·         three triple stage hydraulic pumps
·         one pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

·         length : 11 ft 11 inch (3.65 m)
·         width : 15 inch (38 cm)
·         6 inch (15 cm) pitch - triple grouser shoes
·         101:1 gear reduction
·         sealed, lifetime lubricated rollers

12 ft - 28 ft (3.65 m - 8.53 m) Paving Width

·         12 ft (3.65 m) main frame ( minimum width )
·  4 ft (1.21 m) hydraulically telescoping frame left side
·  hydraulically controlled

Paving Package

·         bolt-together sections to fit any slab 12 ft - 28 ft (3.65 m - 8.53 m)
by 6 inch (15 cm) increments
·         power crown “on-the-go” for uninterrupted paving through transitions and intersections
·         tampers and vibrator rack follow vertical movement of pans
·         hydraulic power crown controlled from operator console
·         crown gauge indicator
·         curb mold inserts for right and/or left side
·         8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft (30.5 cm) intervals
for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

·         adjustable tampering depth
·         variable speed
·         double bar system

Hydraulically Adjustable Side Forms

·         6 way hydraulic adjustment
·         split 30 inch (76 cm) high side forms – folding inward for transport
·         side forms attach to the paving package frame, not tracks
·         18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
·         adjustable edge slump control
·         hydraulically controlled from ground and operators platform

Spreader Auger System

·         16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
·         planetary drives
·         augers are adjustable for height
·         augers drives are shielded from wet concrete
·          quick disconnect for width changes

Hydraulic Strike-Off

·         hydraulically controlled strike-off plates
·         individual controls for variable crown paving

Grade Control System

·         4 hydraulic stringline sensors
·         automatic and manual control from operator’s platform
·         system works with two string lines, or “lock to grade”

Steering System

·         1 hydraulic stringline sensor
·         steer from right or left hand side of machine
·         automatic and manual steering, controlled from operator’s platform

Power Wash System

·         (2) 110 gallon (416.4 liter) water tanks
·         2000 psi, 4 gallon (15.14 liter) per minute hydraulic power wash pump
·         25 ft (7.62 m) high pressure hose and wand

Intermittent Shut-Down System

·         single switch operation
·         electronic over hydraulic
·         controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher

Operator’s Platform

·         hydraulic system pressure gauges: grade, travel,
vibrator, tamper, auger
·         hydraulic controls: travel, vibrator, tamper,
pressure wash, strike-off, auger, grade
·         high visibility “wrap around” console
·         engine controls and monitoring devices mounted on console
·         safety railing
·         engineered for easy monitoring of all machine functions
·         canopy

Optional Equipment

not included in base machine

  • Poly Pads
  • Additional Complete Frame Extension Assemblies
  • Additional Hydraulic Vibrators
  • Curb Molds Built to Customer Specification
  • Male Side Form Key
  • Hydraulic Center Bar Inserters with Electronic Indicator
  • Hydraulic Side Bar Inserter with Electronic Indicator
  • Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
  • Hydraulic Curb Shut-Off for Curb Molds
  • Manual Curb Shut-Off for Curb Molds
  • Belt Conveyor for Unloading Transit Mixer Off-Grade
  • Sensor for Reverse Steering and Travel
  • Water Fogging Bar (for Watering Burlap)
  • Additional 8 Port Vibrator Manifold (When Purchased with New Machine)
  • 4 Point Outrigger Lift -for lifting the Paver for Truck loading
  • Hydraulic Oscillating Auto Float
  • Hydraulic Edge Slump Control (in lieu of manual)
  • Metal Keyway Former and Punch Assembly
  • Other Engines Available at Customer Request
  • Optional Track Lengths and Width
  • Material and Specifications subject to change without notification

Call Today +1.319.824.3011