SFP 8-15
Slip Form Paver

Standard Spec Sheet

SFP 8-15 Slip Form Paver

Turbo Charged Diesel Engine

· 125 hp (93.21kW) TierIII
· enclosed engine compartment
· engine sound proofing

Hydraulic Oil Reservoir 164 Gallon (624.59 Liters)

Fuel Reservoir 60 Gallon (227.12 Liter)

1 Hydraulic System Heat Exchanger with electric fan

6 Hydraulic Vibrators

· vertical adjustment controlled from operator platform
· individual or en-masse vibrator speed controls
· automatic shut-off with machine travel
· maximum flow 4 gallon (15.14 liter) per minute
· normal operating pressure 800 - 1300 psi

6 Hydraulic Vibrator Circuits

· with individual variable controls
· pressure compensated

Hydraulic Pump System

· (2) quad stage hydraulic pumps
· (1) pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

· length: 11 ft. 11inch (3.63 m)
· width: 12 inch (30 cm)
· 6 inch (30 cm) pitch - triple grouser shoes
· 49:1 gear reduction
· sealed, lifetime lubricated rollers

8 Ft. - 15 Ft. (2.43 M - 4.57 M) Paving Width

by 6 inch (15 cm) increments
· 8 ft. (2.43 m) main frame (minimum width) paving pans
· bolt-together sections to allow for paving 8 ft. - 15 ft. (2.43 m - 4.57 m)
by 6 inch (15 cm) increments
3/8 inch thick x 18 inch high x 42 inch long
(9 mm thick x 45 cm high x 107 cm long)
· curb mold inserts for right and/or left side
· 8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft. (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

· adjustable tamping depth
· variable speed
· double bar system

Hydraulically Adjustable Side Forms

· 6 way hydraulic adjustment
· split 30 inch (76 cm) high side forms – folding inward for transport
· side forms attach to the main frame of the machine, not tracks
· 18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
· adjustable edge slump control
· hydraulically controlled from ground and operators platform

Spreader Auger System

· 16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
· planetary drives
· augers are adjustable for height
· augers drives are shielded from wet concrete
· quick disconnect for width changes

Hydraulic Strike-Off

· hydraulically controlled strike-off plates
· individual controls for variable crown paving

Grade Control System

· 4 hydraulic stringline sensors
· automatic and manual control from operator's platform
· system works with two string lines, or “lock to grade”

Steering System

· 1 hydraulic stringline sensor
· steer from right or left hand side of machine
· automatic and manual steering, controlled from operator's platform

Power Wash System

· (1) 110 gallon (416 cm) water tanks
· 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
· 25 ft. (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

· single switch operation
· electronic over hydraulic
· controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher

Operator’s Platform

· hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
· hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
· high visibility “wrap around” console
· engine controls and monitoring devices mounted on console
· safety railing
· engineered for easy monitoring of all machine functions
· canopy

Optional Equipment

not included in base machine

  • Poly Pads
  • Additional Complete Frame Extension Assemblies
  • Additional Hydraulic Vibrators
  • Curb Molds Built to Customer Specification
  • Male Side Form Key
  • Hydraulic Center Bar Inserters with Electronic Indicator
  • Hydraulic Side Bar Inserter with Electronic Indicator
  • Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
  • Hydraulic Curb Shut-Off for Curb Molds
  • Manual Curb Shut-Off for Curb Molds
  • Belt Conveyor for Unloading Transit Mixer Off-Grade
  • Sensor for Reverse Steering and Travel
  • Water Fogging Bar (for Watering Burlap)
  • Additional 8 Port Vibrator Manifold (when purchased with new machine)
  • 4 Point Outrigger Lift -for lifting the Paver for Truck loading
  • Hydraulic Oscillating Auto Float
  • Hydraulic Edge Slump Control (in lieu of manual)
  • Metal Keyway Former and Punch Assembly
  • Other Engines Available at Customer Request
  • Optional Track Lengths and Width
  • Material and Specifications subject to change without notification

Call Today +1.319.824.3011