SFP 14-37

SLIP FORM PAVER

Are you ready to find out how we can help you succeed?

STANDARD SPEC SHEET

SFP 14-37 - SLIP FORM PAVER - 2 TRACK


Turbocharged Diesel Engine* -                  

  • 325 hp (250 kW) Tier IV
  • enclosed engine compartment
  • engine sound proofing

Hydraulic Oil Reservoir 231 gallon (874 liter)                

Fuel Reservoir 148 gallon (560 liter)                    

3 Hydraulic System Heat Exchangers with electric fan

20 Hydraulic Vibrators                   

  • vertical adjustment controlled from operator’s platform
  • individual or en-masse vibrator speed controls
  • automatic shut-off with machine travel
  • maximum flow 4 gallon (15.14 liter) per minute
  • normal operating pressure 800 - 1300 psi

24 Hydraulic Vibrator Circuits with individual variable controls

  • pressure compensated

Hydraulic Pump System                

  • (3) triple stage hydraulic pumps
  • one pressure relief manifold for convenient
  • pressure monitoring and pressure adjustments

Two Crawler Tracks             

  • length: 14 ft. (4.27 m)
  • width: 16-inches (40.64 cm)
  • 6-inch (15.2 cm) pitch - triple grouser shoes
  • 66:1 gear reduction
  • sealed, lifetime lubricated rollers
  • 14 ft. - 37 ft. (4.26 m - 11.27 m) Paving Width
  • 14 ft. (4.26 m) main frame (minimum width)
  • additional paving width to 45 ft. (13.72 m) is optional

Paving Pans              

  • bolt-together sections to fit any slab: 14- 37 ft. (4.26 m - 11.27 m) by 6-inch (15 cm) increments 3/8-inch thick x 18-inch high x 52-inch long (9 mm thick x 45 cm high x 132 cm long)
  • power crown “on-the-go” for uninterrupted paving through transitions and intersections
  • tampers and vibrator rack follow vertical movement of pans
  • hydraulic power crown controlled from operator’s console
  • crown gauge indicator
  • curb mold inserts for right and/or left side
  • 8-inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1-foot (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System                     

  • adjustable tamping depth
  • variable speed
  • double bar system

Hydraulically Adjustable Side Forms                  

  • 6-way hydraulic adjustment
  • split 30-inch (76 cm) high side forms – folding inward for transport
  • side forms attach to the main frame of the machine, not tracks
  • 18-inch (45 cm) vertical stroke,
  • 4-inch (10 cm) horizontal stroke
  • adjustable edge slump control hydraulically controlled from ground and operator’s platform

Spreader Auger System                 

  • 16-inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
  • planetary drives
  • augers are adjustable for height
  • augers drives are shielded from wet concrete
  • quick disconnect for width changes

Hydraulic Strike-Off                       

  • hydraulically controlled strike-off plates
  • individual controls for variable crown paving

Grade Control System                    

  • 4 hydraulic stringline sensors
  • automatic and manual control from operator’s platform
  • system works with two string lines, or “lock to grade”

Steering System                    

  • 1 hydraulic stringline sensor
  • steer from right or left-hand side of machine
  • automatic and manual steering, controlled from
  • operator's platform

Power Wash System                       

  • (2) 110 gallon (416 liter) water tanks
  • 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
  • 25 ft. (7.6 m) high pressure hose and wand

Intermittent Shut-Down System             

  • single switch operation
  • electronic over hydraulic
  • controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher

 Operator’s Platform                       

  • hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
  • hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
  • high visibility “wrap around” console
  • engine controls and monitoring devices mounted on console
  • safety railing
  • engineered for easy monitoring of all machine functions
  • canopy

Transport Dimensions                    

  • width: 14 ft. (4.26 m)
  • length: paving width plus 4 ft. (1.2 m) (2 ft. (60 cm) each side for track and end frame)
  • base machine weight (14 ft. / 4.26 m): 67,000 lbs. (30818kg)
  • full width weight (37 ft. / 11.27 m): 88,8500 lbs. (40386 kg)

*Engine make determined by customer need and availability                   

 

Optional Equipment

(not included in base machine)

Poly Pads                                                                                                                             

  • molded to steel pads, chemical and structural bond

Four Crawler Tracks (in lieu of 2 tracks)

Additional Complete Frame Extension Assemblies                                                   

  • 4 ft. (1.2 m) assembly
  • includes frame sections, paving pans, tamper, auger, walkway
  • does not include vibrators

Additional Hydraulic Vibrators                                                                          

Curb Molds Built to Customer Specification                                                                 

Male Side Form Key

  • bolt on, removable, machined to customer specs

Hydraulic Center Bar Inserters with Electronic Indicator                                          

  • for insertion of straight bars into longitudinal joint

Hydraulic Side Bar Inserter with Electronic Indicator                                                 

  • for insertion of straight or 90° bars into edge of slab

Automatic Transverse Dowel Bar Inserter                                           

Hydraulic Oscillating Rear Belt Finisher                                                                        

  • with Variable Speed Control
  • 14-inch (35 cm) wide rubber belt
  • adjustable winch tensioner

Hydraulic Curb Shut-Off for Curb Molds                                                           

Manual Curb Shut-Off for Curb Molds

Belt Conveyor for Unloading Transit Mixer Off-Grade                                   

  • 30-inch (76 cm) conveyor wing by 13 ft. (3.9 m) long
  • hydraulic variable speed drive
  • hydraulic shift, side to side

Sensor for Reverse Steering and Travel                                                           

Water Fogging Bar (for Watering Burlap)           

  • high pressure
  • brass fogging nozzles

Additional 4 Port Vibrator Manifold                                                                              

(When Purchased with New Machine)

  • includes all vibrator quick disconnects
  • includes 4 individual vibrator speed controls
  • includes all hydraulic hoses
  • factory installation
  • includes additional vibrator pump capacity

Additional 8 Port Vibrator Manifold                                                                              

(When Purchased with New Machine)

  • includes all vibrator quick disconnects
  • includes 8 individual vibrator speed controls
  • includes all hydraulic hoses
  • factory installation
  • includes additional vibrator pump capacity

4 Point Outrigger Lift (for lifting the Paver for Truck loading)

  • all hydraulic controls
  • allows paver to be truck loaded with no side ramp access

Hydraulic Oscillating Auto Float                                                                        

  • variable transverse oscillation speed
  • variable fore-aft oscillation speed
  • crownable
  • 8 ft. (2.43 m) stainless steel float pan

Hydraulic Edge Slump Control (in lieu of manual)

  • hydraulic control from ground position

Metal Keyway Former and Punch Assembly                                                               

  • must specify for left or right side

Critical Spare Parts Package                                                                               

2 Year Filter Package                                                                                            

Optional Track Lengths and Width                                                         

Material and Specifications subject to change without notification

 

Phone: +1 (319) 824-3011

Fax: +1 (319) 824-5013

Email: info@hempaving.com

HEM Paving Equipment
P.O. Box 97 - 601 E First Street
Grundy Center, Iowa 50638 U.S.A.

 

Pleased to be associated with: